ABS+PMMA，Prime ABS Weather-X 200对比ABS+PMMA，KumhoSunny PMMA/ABS HAM8541H物性表,价格行情_搜料

牌号信息	Prime ABS Weather-X 200 物性表 ABS+PMMA & 美国Primex Plastics 指导价格：暂无塑料库存：缺货	KumhoSunny PMMA/ABS HAM8541H 物性表 ABS+PMMA & 上海锦湖日丽指导价格：暂无塑料库存：缺货
牌号简介	是一种丙烯酸封端共挤出的ABS片材，可制成两层或三层复合材料。亚克力帽子赋予一个非常高的光泽，充满活力的色彩，具有卓越的图像深度，出色的紫外线防护，耐化学性，韧性和良好的成型性。应用：Prime ABS Weather-X 200的性能特点使其成为应用的首选材料，包括船舶、个人船艇、休闲车、草坪/花园、建筑/建筑和汽车配件。加工：表面温度=325-360°F模具温度=150-175°F模具温度@170°F模具收缩率为.004-.008英寸/英寸。与丙烯酸相比，ABS可以吸收更多的辐射能；因此，表面温度可能增加得更快。应注意将表面温度保持在325°F-360°F，以避免丙烯酸盖起泡、燃烧和颜色/光泽变化。表面处理：Prime ABS Weather-X 200可使用机械方法（如螺栓、螺钉或夹具）或化学方法（如胶结）进行连接。用丙烯酸改性钻头钻共挤板时，一定要从丙烯酸侧退出，但用标准钻头钻时，一定要从基底侧退出。为了准确和安全，钻孔时应夹紧Prime ABS Weather-X 200。请与Primex塑料公司代表联系，了解有关表面处理、制造或热成型工艺的更多信息。颜色、纹理和功能：Prime ABS Weather-X 200颜色可匹配，以满足您的特定要求。表面通常是高光泽，但纹理，如小腿纹理，H/C，F/L H/C，莱凡特1和塞维利亚。 Is an acrylic capped co-extruded ABS sheet, which can be produced as a two or three multilayer composite. The acrylic cap imparts a very high gloss, vibrant colors with superior depth of image, excellent UV protection, chemical resistance, toughness and excellent formability. Applications: The performance features of Prime ABS Weather-X 200 make it the material of choice for applications, including marine, personal watercraft, recreational vehicles, lawn/garden, building/construction and automotive accessories. Processing: Surface Temp = 325-360°F Mold Temp = 150-175°F De-mold @ 170°F Mold shrink is .004-.008 in/in. ABS may absorb greater amounts of radiant energy than acrylic; thus, surface temperatures may increase more rapidly. Care should be taken to maintain the surface temperature at 325°F-360°F to avoid blistering, burning and color/gloss shift of the acrylic cap. Finishing: Prime ABS Weather-X 200 can be joined using mechanical methods such as bolts, screws or clamps, or chemical methods such as cementing. When drilling coextruded sheet with an acrylic modified drill bit, be sure to exit from the acrylic side but when drilling with a standard bit, be sure to have the bit exit from the substrate side. For accuracy and safety, Prime ABS Weather-X 200 should be clamped during drilling. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: Prime ABS Weather-X 200 can be color matched to meet your specific requirements. The surface is typically high gloss but textures such as calf grain, H/C, F/L H/C, Levant 1 and Seville are available.	HAM8541H是一种无漆改性的PMMA/ABS树脂，HAM8541H具有以下综合性能：（1）抗划伤、ph=2h（2）高光泽（G60°>95）（3）自由型（黑色和火花、半透明、火花、透明）（4）廉价。HAM8541H主要用于复杂零件、薄层零件、电话、音响等小电器。等。 HAM8541H is paint free improved PMMA/ABS resin.HAM8541H has comprehensive properties:(1)anti-scratch,PH=2H (2) high gloss(G60°>95)(3)free style(black and spark,semitransparent,spark,transparent) (4)cheap.HAM8541H is mainly used in complex part, thin layer part ,small appliance as telephone, sound. etc.

产品描述
厂家：	美国Primex Plastics	上海锦湖日丽 KumhoSunny
类别：	ABS+PMMA ABS+PMMA	ABS+PMMA ABS+PMMA
填料：
用途：	建筑材料,水上运动器材,体育用品,草坪和园林设备,船舶应用,建筑应用领域,汽车领域的应用	电器用具,家电部件
性能特点：	耐候抗UV,易加工,表面光泽度好,冲击性能好,颜色稳定,耐高温,拉伸性能好,耐化学性 Weather resistance is good,Excellent Processability,Good surface appearance,High impact resistance,Good color stability,High Heat Resistance,Good Tensile Strength,Solvent resistance	表面光泽度好,耐刮擦 Good surface appearance,High scratch resistance
加工条件：		注射成型 Injection Molding

技术参数

物理性能
PHYSICAL Prime ABS Weather-X 200 KumhoSunny PMMA/ABS HAM8541H 单位
UNIT 测试方法
TEST METHOD

密度
Density g/cm³ ASTM D792

收缩率(MD)
Shrinkage % ASTM D955

熔体质量流动速率(220℃，10.0kg)
Melt Flow Rate g/10min ASTM D1238

熔体质量流动速率(230℃，3.80kg)
Melt Flow Rate g/10min ASTM D1238

机械性能
MECHANICAL Prime ABS Weather-X 200 KumhoSunny PMMA/ABS HAM8541H 单位
UNIT 测试方法
TEST METHOD

弯曲强度
Flexural Strength MPa ASTM D790

弯曲模量
Flexural Modulus MPa ASTM D790

拉伸应变(断裂)
Tensile strain % ASTM D638

拉伸强度
tensile strength MPa ASTM D638

拉伸强度(断裂)
tensile strength MPa ASTM D638

冲击性能
IMPACT Prime ABS Weather-X 200 KumhoSunny PMMA/ABS HAM8541H 单位
UNIT 测试方法
TEST METHOD

悬臂梁缺口冲击强度(0℃，3.2mm)
Izod Notched Impact strength J/m ASTM D256

悬臂梁缺口冲击强度(22℃，3.2mm)
Izod Notched Impact strength J/m ASTM D256

悬臂梁缺口冲击强度(3.2mm)
Izod Notched Impact strength J/m ASTM D256

热性能
THERMAL Prime ABS Weather-X 200 KumhoSunny PMMA/ABS HAM8541H 单位
UNIT 测试方法
TEST METHOD

热变形温度(1.8 MPa，未退火)
HDT ℃ ASTM D648

热变形温度(1.8 MPa，未退火，3.2 mm)
HDT ℃ ASTM D648

维卡软化温度
Vicat Softening Temperature ℃ ASTM D1525 2

光学性能
OPTICAL Prime ABS Weather-X 200 KumhoSunny PMMA/ABS HAM8541H 单位
UNIT 测试方法
TEST METHOD

光泽度(60°)
gloss ASTM D523

补充信息
Prime ABS Weather-X 200 KumhoSunny PMMA/ABS HAM8541H 单位
UNIT 测试方法
TEST METHOD

De(mold Temperature)
De（mold Temperature） ℃

Surface Temperature
Surface Temperature ℃

模具温度(other)
Mold temperature ℃

电气性能
ELECTRICAL Prime ABS Weather-X 200 KumhoSunny PMMA/ABS HAM8541H 单位
UNIT 测试方法
TEST METHOD

体积电阻率
Volume resistivity ohms·cm IEC 60093

表面电阻率
Surface resistivity ohms IEC 60093

加工方式

注射 Prime ABS Weather-X 200 KumhoSunny PMMA/ABS HAM8541H 单位测试方法

加工熔体温度 °C

射嘴温度 °C

干燥时间 hr

干燥温度 °C

建议的最大水分含量 %

料筒中部温度 °C

料筒前部温度 °C

料筒后部温度 °C

模具温度 °C

背压 MPa

螺杆转速 rpm

备注

1 一般属性：这些不能被视为规格。

2 标准 B (120°C/h)


相关资讯

牌号简介
产品描述
技术参数
物理性能
机械性能
冲击性能
热性能
光学性能
补充信息
电气性能
加工方式
注射
备注
返回顶部

ABS+PMMA，Prime ABS Weather-X 200对比ABS+PMMA，KumhoSunny PMMA/ABS HAM8541H对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别