PAI，Torlon® AI-30 LM对比PAI，Duratron® T4501物性表,价格行情_搜料

牌号信息	Torlon® AI-30 LM 物性表 PAI & 比利时索尔维指导价格：暂无塑料库存：缺货	Duratron® T4501 物性表 PAI & 瑞士跨骏指导价格：暂无塑料库存：缺货
牌号简介	Torlon® AI-30 LM是为高性能涂料工业开发的湿聚合物颗粒。这种聚酰胺-酰亚胺前体由约35%的聚合物固体、63%的水和2%的NMP组成。聚合物主链的高酸值允许通过添加适当的络合胺来配制水溶液。使用Torlon® AI-30 LM制造的水基溶液具有固有的低VOC，这有助于最终用户满足严格的环境法规。基于Torlon® AI-30 LM聚合物的涂层可产生耐用、耐磨、热稳定的薄膜。固化后的树脂对有机溶剂和大量其他工业和商业化学品具有优异的抵抗力。该树脂具有优异的摩擦学特性，以及其与含氟聚合物之间无与伦比的涂层内粘附力。水性AI-30lm聚合物涂料为电气/电子、高温装饰和防腐应用提供了一种可持续的解决方案。此外，印刷电路板的磁线绝缘和保护涂层可由溶剂型（NMP）聚酰胺酰亚胺溶液转化而成。工业应用包括用于炊具、家电和家庭用品的底漆和装饰面漆。水性AI-30 lm聚合物溶液可轻易地与水性含氟聚合物分散体结合，以产生可持续、高性能、低摩擦、耐腐蚀的涂层，为工业和汽车零件提供保护。 Torlon® AI-30 LM is a wet polymer granule developed for the performance coatings industry. This polyamide-imide precursor consists of roughly 35% polymer solids, 63% water and 2% NMP. The high acid number of the polymer backbone allows the formulation of aqueous solutions with the addition of an appropriate complexing amine. Aqueous-based solutions made with Torlon® AI-30 LM have inherently low VOCs, which helps end users meet stringent environmental regulations. Coatings based on the Torlon® AI-30 LM polymer yield durable, abrasion-resistant, thermally-stable films. The cured resin has superior resistance to organic solvents and a wide array of other commercial and industrial chemicals. Outstanding tribological characteristics are afforded both by the resin as well as its unparalleled intra-coat adhesion to fluoropolymers. Aqueous-based AI-30 LM polymer coatings offer a sustainable solution for electrical/electronic, high temperature decorative and corrosion preventative applications. In addition, magnet wire insulation and protective coatings for printed circuit boards may be converted from solvent-borne (NMP) polyamide-imide solutions. Industrial applications include primers and decorative topcoats for cookware, appliances and housewares. Aqueous AI-30 LM polymer solutions may be easily combined with aqueous fluoropolymer dispersions to produce sustainable, high-performance, low-friction, corrosion-resistant coatings that provide protection to industrial and automotive parts.	Duratron® T4501压模PAI非常适合一般用途的磨损和摩擦零件。它具有更高的抗压强度，因此可以承载比Duratron T4540更多的负载。它的组成与Torlon 4301 PAI相似，需要较大形状时可选择。Duratron PAI是性能最高的可熔加工塑料。它对高温有很好的抵抗力。它能够在连续温度为500°F（260°C）的严重应力条件下工作。与大多数先进的工程塑料相比，用Duratron材料制成的零件具有更高的抗压强度和抗冲击性。其极低的线性热膨胀系数和高的蠕变阻力在其整个使用范围内提供了良好的尺寸稳定性。Duratron PAI是一种非晶形材料，Tg（玻璃化转变温度）为537°F（280°C）。象限工程塑料产品从象限EPP生产的库存形状和零件的测试中提供的数据。 Duratron® T4501 compression molded PAI is well suited for general purpose wear and friction parts. It has a higher compressive strength and can therefore carry more load than Duratron® T4540. It is similar in composition to Torlon 4301 PAI, and selected when larger shapes are required. Duratron® PAI is the highest performing melt processable plastic. It has superior resistance to elevated temperatures. It is capable of performing under severe stress conditions at continuous temperatures to 500°F (260°C). Parts machined from Duratron® stock shapes provide greater compressive strength and higher impact resistance than most advanced engineering plastics. Its extremely low coefficient of linear thermal expansion and high creep resistance deliver excellent dimensional stability over its entire use range. Duratron® PAI is an amorphous material with a Tg (glass transition temperature) of 537°F (280°C). Data provided by Quadrant Engineering Plastic Products from tests on stock shapes and parts produced by Quadrant EPP.

产品描述
厂家：	比利时索尔维 Solvay	瑞士跨骏 Quadrant
类别：	PAI PAI	PAI PAI
填料：
用途：	涂层应用,粘合剂	轴承,密封件,衬套
性能特点：	阻燃,耐高温,粘结性好,耐磨,耐化学性,水溶性 Flame Characteristics,High Heat Resistance,Good bond,Good wear resistance,Solvent resistance,Water soluble	机械强度好,韧性好,冲击性能好,尺寸稳定性好,耐酒精,耐酸,耐磨,抗压性能好,耐化学性,热稳定性好,耐碳氢化合物,无定形的,防火阻燃等级V-0 Good Rigidity,Good flexibility,High impact resistance,Good Dimensional Stability,Ethanol tolerance,Acidproof,Good wear resistance,Good compressive strength,Solvent resistance,Heat Stabilized,Hydrocarbons,Amorphous,V-0
加工条件：	溶液处理 Solution treatment	压缩模塑

技术参数

物理性能
PHYSICAL Torlon® AI-30 LM Duratron® T4501 单位
UNIT 测试方法
TEST METHOD

分子量(Mn)
molecular weight g/mol

分子量(Mw)
molecular weight g/mol

吸水率(24hr)
Water Absorption %

吸水率(饱和)
Water Absorption %

固体含量
Solid content %

密度
Density g/cm³ ASTM D792

酸值
acid value mg KOH/g

冲击性能
IMPACT Torlon® AI-30 LM Duratron® T4501 单位
UNIT 测试方法
TEST METHOD

悬臂梁缺口冲击强度
Izod Notched Impact strength J/m ASTM D256-A

热性能
THERMAL Torlon® AI-30 LM Duratron® T4501 单位
UNIT 测试方法
TEST METHOD

导热系数
Thermal Conductivity W/m/K ASTM F433

最高使用温度(Long Term，Air)
Max. usage temperature ℃

热变形温度(1.8 MPa，未退火)
HDT ℃ ASTM D648

玻璃化转变温度
Glass transition temperature ℃ ASTM D3418

线性热膨胀系数(MD：-40~149℃)
Coeff.of linear therm expansion 1/℃ ASTM E831

电气性能
ELECTRICAL Torlon® AI-30 LM Duratron® T4501 单位
UNIT 测试方法
TEST METHOD

介电常数(1 MHz)
Dielectric constant ASTM D150

耗散因数(1 MHz)
Dissipation factor ASTM D150

表面电阻率
Surface resistivity ohms 内部方法

阻燃性能
FLAMMABILITY Torlon® AI-30 LM Duratron® T4501 单位
UNIT 测试方法
TEST METHOD

3.18 mm，Estimated Rating
3.18 mm，Estimated Rating UL 94

补充信息
Torlon® AI-30 LM Duratron® T4501 单位
UNIT 测试方法
TEST METHOD

限压速度
Pressure limiting speed MPa·m/s 内部方法

机械性能
MECHANICAL Torlon® AI-30 LM Duratron® T4501 单位
UNIT 测试方法
TEST METHOD

压缩强度(10% 应变)
compressive strength MPa ASTM D695

压缩模量
Compressive Modulus MPa ASTM D695

弯曲强度(屈服)
Flexural Strength MPa ASTM D790

弯曲模量
Flexural Modulus MPa ASTM D790

拉伸应变(断裂)
Tensile strain % ASTM D638

拉伸强度(极限)
tensile strength MPa ASTM D638

拉伸模量
Tensile modulus MPa ASTM D638

摩擦系数(与钢 - 静态)
Frictional coefficient 内部方法

洛氏硬度(E 级)
Rockwell hardness

洛氏硬度(M 级)
Rockwell hardness

磨损因数
Wear factor 10^-8 mm³/N·m ASTM D3702

邵氏硬度(邵氏 D)
Shore hardness ASTM D2240

备注

1 一般属性：这些不能被视为规格。

2 68°F

3 EOS/ESD S11.11

4 4:1 safety factor


相关资讯

牌号简介
产品描述
技术参数
物理性能
冲击性能
热性能
电气性能
阻燃性能
补充信息
机械性能
加工方式
备注
返回顶部

PAI，Torlon® AI-30 LM对比PAI，Duratron® T4501对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别