
公司信息及水印






牌号简介 About |
---|
Slip/Anti-Block MB description POYAD SB231是一个基于PE的主批次,包含迁移Slip代理和特殊防阻塞代理的混合物。它是专为生产铸造和吹塑聚乙烯薄膜而设计的,最终产品需要防滑和防堵特性。滑动添加剂相对缓慢地迁移到薄膜表面,从而减少密封和印刷过程中的潜在问题。由于其特殊的防阻塞功能,它几乎对雾度和光泽度没有影响。不应在保鲜膜配方中使用。应用程序POYAD SB231的设计是为了便于稀释和均匀混合,因此适用于使用自动加药装置或通过预混合直接添加。根据薄膜厚度(较厚的薄膜需要较少的添加量)、冷却条件、应用和其他添加剂的存在,可以使用0.8%到2%。应存放在干燥、阴凉的地方,存放时间不超过6个月。 Slip / Anti-block MB Description POYAD SB231 is a PE based master batch containing a blend of a migration slip agent and a special anti block agent. It's designed for use in manufacturing of cast and blown PE film where the end product requires slip and anti-block characteristics. The slip additive migrates to the film surface relatively slowly, thus reducing potential problems during sealing and printing. Due to its specialized anti-block it has almost no effect on haze and gloss. It shouldn't be used in cling film formulation. Application POYAD SB231 is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the film thickness (the thicker film needs less addition level), cooling condition, application and existence of other additives it can be used from 0.8 to 2%. It should be stored in a dry and cool place not to exceed 6 month. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.22 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
4.0 到 8.0 | g/10min | ASTM D1238 |
含水率 Moisture content |
< 2000 | ppm | ASTM D644 |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颗粒大小 Particle size |
30.0 到 40.0 | pcs/cm³ | 内部方法 |
离散度 Discrepancy |
OK | 内部方法 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部 ![]()
商务部表示持续为中小微外贸企业纾困解难
2022-03-25 在商务部24日举行的例行新闻发布会上,商务部新闻发言人束珏婷说,针对中小微外贸企业的实际困难,商务部认真贯彻党中央、国务院决策部署,会同相关部门研究出台支持政策,协 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |