
公司信息及水印








牌号简介 About |
---|
Moplen HP563S Moplen HP563S是由PMC在Basell许可下使用Spheripol工艺生产的受控流变聚丙烯均聚物。Moplen HP563S是一种均聚物,通常用于纺粘非织造布。Moplen HP563S树脂符合21 CFR 177.1520联邦法规中食品接触的FDA要求。Moplen HP563S Moplen HP563S是一种使用Spheripol工艺制造的聚丙烯均聚物。它具有优良的拉伸性能和可纺性,特别适用于细旦纺粘非织造布的生产。潜在的最终用途包括尿布和卫生巾、衣服套、湿纸巾、购物袋和农用纺织品。Moplen HP563S可在需要抗气体褪色性能的应用中进行评估。 Moplen HP563S Moplen HP563S is the controlled rheology polypropylene homopolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen HP563S is a homopolymer typically used in spunbonded nonwovens. Moplen HP563S resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. Moplen HP563S Moplen HP563S is a polypropylene homopolymer manufactured using the Spheripol process. Its has excellent drawability and spinnability properties, and is particularly suitable for production of fine denier spunbond non-wovens. Potential end use applications include diapers and sanitary napkins, apparel covers, wet tissues, shopping bags and agricultural-use textiles. Moplen HP563S can be evaluated in applications that need Anti-Gas Fading performance. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
38 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Izod Notched Impact strength |
|||
23℃,注塑成型 Injection Molding 23 ℃, injection molding |
注册或登录后
所有资料免费
|
J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 HDT |
注册或登录后
所有资料免费
|
||
0.45 MPa,未退火 unannealed,注塑成型 Injection Molding 0.45 MPa, unannealed, injection molding |
注册或登录后
所有资料免费
|
℃ | ASTM D648 |
维卡软化点 vicat softening point |
注册或登录后
所有资料免费
|
℃ | ASTM D1525 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell Hardness |
注册或登录后
所有资料免费
|
||
R 级 R-level |
注册或登录后
所有资料免费
|
ASTM D785 | |
拉伸强度 Tensile Strength |
注册或登录后
所有资料免费
|
||
屈服 yld,注塑成型 Injection Molding Injection Molding |
注册或登录后
所有资料免费
|
MPa | ASTM D638 |
拉伸应变 Tensile strain |
注册或登录后
所有资料免费
|
||
屈服 yld,注塑成型 Injection Molding Injection Molding |
注册或登录后
所有资料免费
|
% | ASTM D638 |
弯曲模量 Flexural Modulus |
注册或登录后
所有资料免费
|
||
注塑成型 Injection Molding |
注册或登录后
所有资料免费
|
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |