
公司信息及水印






牌号简介 About |
---|
CONATHANE® EN-1554是一种基于聚醚的聚氨酯树脂系统,主要用作线束分接头、防水电气接头、电缆、电缆端部密封件、印刷电路和其他电气部件的成型、封装和封装化合物。该系统还可用于机械零件的铸造或成型,也可作为泵、溜槽和输送机的衬里材料,其中必须具有优异的耐磨性。CONATHANE® EN-1554可在室温或高温下固化。CONATHANE® EN-1554完全固化后,是一种坚硬的、耐冷流动的弹性体,具有良好的耐油、耐汽油、耐JP-4燃料、耐水和耐海水性能,同时还提供出色的防腐蚀或防污染保护。当按照MIL-E-5262C和MIL-STD-810B进行测试时,该系统是杀菌剂。已开发出三种底漆,用于在固化过程中将EN-1554与金属、氯丁橡胶和聚氯乙烯粘合。金属推荐使用Conap AD-1146,氯丁橡胶推荐使用Conap PR-1167,聚氯乙烯推荐使用Conap AD-1161。 CONATHANE EN-1554 is a polyether based polyurethane resin system primarily intended for use as a molding, encapsulating and potting compound for harness breakouts, watertight electrical connectors, cables, cable end seals, printed circuitry and other electrical components. The system also has utility in the casting or molding of mechanical parts and as a lining material for pumps, chutes and conveyors, where outstanding abrasion resistance is a necessity. CONATHANE EN-1554 may be cured at room or elevated temperatures. CONATHANE EN-1554, when fully cured, is a tough, cold-flow resistant elastomer that has good resistance to oils, gasoline, JP-4 fuel, water, and seawater and also provides outstanding protection against corrosion or contamination. The system is funginert when tested in accordance with MIL-E-5262C and MIL-STD-810B. Three primers have been developed for use in bonding EN-1554 to metals, neoprene, and polyvinyl chloride during the curing process. CONAP® AD-1146 is recommended for metals, CONAP® PR-1167 for neoprene, and CONAP® AD-1161 for polyvinyl chloride. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
-- -- 1 |
1.09 | g/cm³ | |
-- -- 2 |
0.998 到 1.20 | g/cm³ | |
吸水率 Water Absorption |
|||
4hr沉浸在D.I. 水中@00°F 4hr immersed in D I. @ 00 ° F in water |
0.33 | % | |
收缩率 Shrinkage |
|||
Volume Volume |
4.5 | % | |
弹性体 Elastomer |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
撕裂强度 tear strength 3 |
61.3 | kN/m | |
压缩形变 Compression deformation |
|||
70℃,22 hr 70℃,22 hr |
% | ||
老化性能 Aging property |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度的变化率 Change in Tensile Strength |
|||
70℃,336 hr,在水中 70 ℃, 336 hours in water |
% | ||
电气性能 ELECTRICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
|||
-- -- 4 |
ohms | ||
-- -- 5 |
ohms | ||
体积电阻率 Volume resistivity |
|||
25 ℃ 25 ℃ |
ohms·cm | ||
121 ℃ 121 ℃ |
ohms·cm | ||
介电强度 Dielectric strength |
|||
1.27 mm 1.27 mm |
kV/mm | ||
3.18 mm 3.18 mm |
kV/mm | ||
介电常数 Dielectric constant |
ASTM D150 | ||
25 ℃,1 kHz 25 ℃,1 kHz |
|||
25 ℃,1 MHz 25 ℃,1 MHz |
|||
耐电弧性 Arc resistance |
sec | ||
绝缘电阻 insulation resistance |
|||
25℃ 25℃ |
ohms | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
|||
热固性混合粘度 Thermosetting mixed viscosity |
|||
25℃ 25℃ 6 |
cP | ||
25℃ 25℃ 7 |
cP | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Isocyanate Content Isocyanate Content 8 |
% | ||
不挥发物含量(Mixed System) Mixed System |
% | ||
抗真菌性 Antifungal activity |
|||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
|||
拉伸模量 Tensile modulus |
|||
300% 正割 300% secant |
MPa | 内部方法 | |
拉伸强度 tensile strength |
MPa | ||
拉伸应变 Tensile strain |
|||
断裂 fracture |
% |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Mix |
3 Hardener |
4 C 模具 |
5 250°F |
6 77°F |
7 Resin |
【新闻资讯】查看全部
杜邦、陶氏化学发布重组后三家独立上市公司拆分细节
2016-02-23 备受关注的两大化工巨头――杜邦公司(纽约证交所代码:DD)和陶氏化学公司(纽约证交所代码:DOW)重组案有了新进展。今日,“陶氏杜邦公司” 公布了意向拆分为三家独立上市公司后农业公司在美国的营运地点安排。至此,计划中的三家独立上市公司都明确了细节。 据悉,该农业公司的总部将设在特拉华州威明顿市,设有首席行政官办公室及企业核心支持职能部门。位于爱荷华州约翰斯顿市以及印第安纳州印第安纳波利斯市的营运地点将作为其全球业务中心,各业务条线、业务支持部门、研发部门、全球供应链以及销售 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |