
公司信息及水印






牌号简介 About |
---|
描述:在管式反应器中高压生产的EB853低密度聚乙烯。用该产品获得的薄膜表现出优异的光学性能、良好的密封性和低凝胶含量。应用:典型的吹塑薄膜应用包括尿布和其他一般用途的薄膜,以及LLDPE和HDPE混合物。工艺:吹塑和铸膜挤出 EB853 low density polyethylene produced under high pressure in a Tubular reactor. Films obtained with this product show outstanding optical properties, good sealability, and low gel content. Applications: Typical blown film applications include films for diapers and other general purposes as well as LLDPE and HDPE blends. Process: Blown and Cast Film Extrusion |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.923 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
2.7 | g/10min | ASTM D1238 |
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
TD,断裂,40 µm,吹塑薄膜 TD, fracture, 40 µ m, blow molded film |
20.0 | MPa | ASTM D882 |
MD,断裂,40 µm,吹塑薄膜 MD, fracture, 40 µ m, blow molded film |
25.0 | MPa | ASTM D882 |
拉伸应变 Tensile strain |
|||
TD,断裂,40 µm,吹塑薄膜 TD, fracture, 40 µ m, blow molded film |
1100 | % | ASTM D882 |
MD,断裂,40 µm,吹塑薄膜 MD, fracture, 40 µ m, blow molded film |
% | ASTM D882 | |
落锤冲击 Gardner Impact |
|||
40 µm,吹塑薄膜 40 µ m, blow molded film |
g | ASTM D1709 | |
撕裂强度 tear strength |
|||
TD,40 µm,吹塑薄膜 TD, 40 µ m, blow molded film |
g | ASTM D1922 | |
光学性能 OPTICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
光泽度 gloss |
|||
60°,40.0 µm,吹塑薄膜 60 °, 40.0 µ m, blow molded film |
ASTM D2457 | ||
雾度 Haze |
|||
40 µm,吹塑薄膜 40 µ m, blow molded film |
% | ASTM D1003 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部 ![]()
龙辰科技计划新增六条BOPP薄膜生产线 提高产能
2022-05-12 近日,在湖北龙辰科技股份有限公司生产车间,总工程师汪泽富介绍道:这是我们的BOPP电容薄膜生产车间,我们公司现有三条生产线,今年到明年将新增六条新的生产线,届时产能将达 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |