
公司信息及水印






牌号简介 About |
---|
聚合物特性:基于Andur® BD 78 AP的弹性体即使在100摄氏度的高温下也能很好地抵抗水环境,同时对水性酸、碱和漂白剂也有很好的抵抗力。这将使Andur® BD 78 AP弹性体能够应用于其他传统聚氨酯弹性体无法使用的场合。Andur® BD 78 AP与Curene 442(MBOCA)不兼容。 Polymer Characteristics: Elastomers based on Andur® BD 78 AP show excellent resistance to aqueous environments even at high temperatures up to 100C. They also show excellent resistance to aqueous acids, bases and bleach. This will enable Andur® BD 78 AP elastomers to be put in applications where other conventional polyurethane elastomers cannot go. Andur® BD 78 AP is not compatible with Curene® 442 (MBOCA). |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.940 | g/cm³ | |
100℃ 100℃ |
0.884 | g/cm³ | |
吸水率 Water Absorption |
|||
平衡 balance |
0.19 | % | |
弹性体 Elastomer |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
断裂 fracture |
15.9 | MPa | |
100% 应变 100% strain |
6.76 | MPa | |
300% 应变 300% strain |
MPa | ||
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ||
撕裂强度 tear strength |
|||
-- -- 2 |
kN/m | ASTM D624 | |
开裂 cracking |
kN/m | ASTM D470 | |
开裂 cracking |
kN/m | ASTM D1938 | |
压缩形变 Compression deformation |
|||
70℃,22 hr 70℃,22 hr |
% | ASTM D395 | |
巴肖氏弹性 Basho's elasticity |
% | ASTM D2632 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Brittle Temperature |
℃ | DMA | |
线性热膨胀系数 Coeff.of linear therm expansion |
|||
MD MD |
1/℃ | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
NCO NCO |
% | ||
|
|||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
粘度 viscosity |
|||
100℃ 100℃ |
Pa·s | ||
70℃ 70℃ |
Pa·s | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
|||
拉伸模量 Tensile modulus |
MPa |
备注 |
---|
2、C 模具 |
【新闻资讯】查看全部
美国领衔乙烯产能扩张潮 全球聚烯烃现过剩隐忧
2017-12-13 美国和世界其他地区大量建设的PE产能将超过需求增长,可能需数年时间消化才能使市场供需平衡。美国页岩气革命以及其他地区的项目将会给全球带来2500万吨/年左右的新增乙烯产能,在全球聚烯烃市场掀起一场“大战”。 页岩气催生乙烯建设潮 仅美国就将增加大量PE新产能,至2019年美国将新建9套乙烯裂解装置,新增乙烯生产能力920万吨/年,现有乙烯装置扩能改造还将再增加乙烯产能110万吨/年,两方面总计占到美国乙烯产能的34%。 到2019年,美国将新 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |