
公司信息及水印






牌号简介 About |
---|
是热塑性弹性体(TPE-S)的商业名称,基于SBS,SEBS(苯乙烯-丁二烯-苯乙烯;苯乙烯-乙烯-丁二烯-苯乙烯)嵌段共聚物,通过混合SBS,SEBS,…含聚烯烃的弹性体,如PP、PE、EVA等对酸、碱和所有水溶液的耐受性都很好。对酒精和乙二醇的抗性中等。对芳香烃、脂肪和油的抵抗力很差。向上抵抗圆系列松弛增加。所有的“Solplasts”都有很好的体积电阻:超过1012欧姆厘米。在聚烯烃基(PE、PP、EVA)上使用上色母料。以SBS+SEBS嵌段共聚物为基础的8000系列工艺配方,具有不同的物理特性和光学特性。工作温度在-50 in+60°C之间,很快达到+80°C,适用于在光照下具有较高颜色稳定性的产品。在短时间负载下对高温的批准稳定性。内外用8000C挤压垫圈。 Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS, SEBS (styrene - butadiene - styrene; styrene - ethilene butadiene - styrene) block copolymers, gathered with mixing SBS, SEBS, ... elastomers with polyolefines such as PP, PE, EVA, ... Resistance to acid, bases and all aqueous solutions is excellent. Resistance to alcohol and glycols is medium good. Resistance to aromatic hydrocarbons, fat and of oil is bad. Resistace round series upwards loosely increases. All "SOLPLASTS" have a good electric-volume resistance: thats more then 1012 ohm-cm. For coloring masters are used on a polyolefine base (PE, PP, EVA). SERIES 8000 Technical compaund on SBS + SEBS block copolymers base; Different phisical characteristics and optics considering purpose of use. Work temperature between - 50 in + 60°C, very shortly up to +80°C For aplication with higher coloral stability of the product under light exposure. Approved stability to higher temperatures at shortime loads. 8000C Extrusion of washers for internal and partly external use. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.04 到 1.16 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
1.0 到 7.0 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
55 到 85 | ISO 868 | |
弹性体 Elastomer |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
压缩形变 Compression deformation |
|||
72℃,23 hr 72℃,23 hr |
55 到 65 | % | ISO 815 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
中国民营油企搞垮了日本和韩国!中东北美虎视眈眈?
2017-09-21 以中国的体量,随手一做就能把一个行业拉下神坛。比如炼油行业,只是给民企稍稍松绑,就对全球原油和成品油流向造成了深刻的冲击,日韩油企就已经鬼哭狼嚎了。然而,我们还在继续推进民营炼油厂的做大做强…… 民营的“茶壶”炼油厂,曾经如一盘散沙,平均炼油能力只有7万桶/日。但是聚沙成塔,其合并炼油能力在2005年也占到了国内总炼油能力的10%。一切随着2015年国家向部分企业发放独立进口配额而改变。 由于赶上了油价崩溃的好时候,这些“茶壶”炼油厂的合并炼油能力在2015 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |