公司信息及水印
| 牌号简介 About |
|---|
| PS是Polycasa挤塑结晶聚苯乙烯板的品牌名称,为许多室内应用提供解决方案。除了透明、抗反射和标准蛋白石白外,Polycasa还提供各种颜色和设计。具有良好的光学性能和明亮的表面。高透光率(最小88%波长:500纳米,厚度3毫米)。价格低廉。低密度(1.05)。耐化学性好,刚性高。紫外线稳定-在室内使用时,颜色保持多年不变。(如有特殊要求,可在无紫外线稳定的情况下生产Polycasa PS板。然后,它们符合所有当前的食品接触法规,可用于接触食品。)电晕处理的可能性-提高表面张力的过程。(电晕处理后的结果是肉眼看不到的表面,但实际上更容易接受墨水、涂料和粘合剂。)Polycasa PS板还结合了以下优良性能:良好的透明度。表面硬度好。可回收性好。吸水率低。应用程序图片框。淋浴室门(平的和弯曲的)。室内玻璃窗 PS is the brand name for Polycasa's extruded Crystal Polystyrene sheets, offering solutions for many indoor applications. As well as clear, anti-reflex and standard opal white, a variety of colours and designs are also available as a result of the extrusion process Polycasa can offer. CHARACTERISTICS Good optical properties and a brilliant surface. High light transmission (min 88% wavelength: 500 nm, thickness 3 mm). Low price. Low density (1.05). Good chemical resistance and high rigidity. UV-stabilised - remains colour constant for many years when used indoors. (On special request Polycasa PS sheets can be produced without UV-stabilisation. They then meet all current food contact legislation and can be used in contact with foodstuffs.) Possibility of corona treatment - process to increase surface tension. (The result after corona treatment is a surface that is unchanged to the naked eye, but in fact is much more receptive to inks, coatings, and adhesives.) Polycasa PS sheets also combine the following excellent properties: Excellent transparency. Good surface hardness. Good recyclability. Low water absorption. APPLICATIONS Picture frames. Shower cabin doors (flat and curved). Indoor glazing. |
| 技术参数 Technical Data | |||
|---|---|---|---|
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density |
1.05 | g/cm³ | ISO 1183 |
|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
简支梁无缺口冲击强度 Charpy Unnotched Impact strength |
6.0 | kJ/m² | ISO 179 |
|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
维卡软化温度 Vicat Softening Temperature |
|||
|
B50 B50 |
注册或登录后
所有资料免费
|
℃ | ISO 306 |
|
线性热膨胀系数 Coeff.of linear therm expansion |
注册或登录后
所有资料免费
|
||
|
MD MD |
注册或登录后
所有资料免费
|
1/℃ | DIN 53752 |
|
比热 specific heat |
注册或登录后
所有资料免费
|
J/kg/℃ | |
|
导热系数 Thermal Conductivity |
注册或登录后
所有资料免费
|
W/m/K | DIN 52612 |
|
热变形温度 HDT |
注册或登录后
所有资料免费
|
℃ | ISO 75-2 |
|
最高使用温度 Max. usage temperature |
注册或登录后
所有资料免费
|
||
|
电气性能 ELECTRICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
表面电阻率 Surface resistivity |
注册或登录后
所有资料免费
|
ohms | DIN 53482 |
|
体积电阻率 Volume resistivity |
注册或登录后
所有资料免费
|
ohms·cm | DIN 53482 |
|
光学性能 OPTICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
透光率 Light Transmission |
注册或登录后
所有资料免费
|
% | DIN 5036 |
|
折射率 Refractive index |
注册或登录后
所有资料免费
|
ISO 489 | |
|
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
Degradation Temperature Degradation Temperature |
注册或登录后
所有资料免费
|
℃ | |
|
Sheet Temperature(Forming) Sheet Temperature(Forming) |
注册或登录后
所有资料免费
|
℃ | |
|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
洛氏硬度 Rockwell hardness |
注册或登录后
所有资料免费
|
||
|
M 级 M-level |
注册或登录后
所有资料免费
|
ISO 2039-2 | |
|
拉伸模量 Tensile modulus |
注册或登录后
所有资料免费
|
||
|
4 mm 4 mm |
注册或登录后
所有资料免费
|
MPa | ISO 527-2 |
|
拉伸强度 tensile strength |
注册或登录后
所有资料免费
|
||
|
4 mm 4 mm |
注册或登录后
所有资料免费
|
MPa | ISO 527-2 |
|
拉伸应变 Tensile strain |
注册或登录后
所有资料免费
|
||
|
断裂,4 mm Fracture, 4 mm |
注册或登录后
所有资料免费
|
% | ISO 527-2 |
|
弯曲模量 Flexural Modulus |
注册或登录后
所有资料免费
|
||
|
4 mm 4 mm |
注册或登录后
所有资料免费
|
MPa | ISO 178 |
|
弯曲强度 Flexural Strength |
注册或登录后
所有资料免费
|
||
|
4 mm 4 mm |
注册或登录后
所有资料免费
|
MPa | ISO 178 |
| 备注 |
|---|
| 1 一般属性:这些不能被视为规格。 |
|
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |














支付宝
微信支付