
公司信息及水印






牌号简介 About |
---|
一种医药级的PE/EVOH/PCTFE柔性薄膜,非常规粘合,专门开发用于容纳要求高的液体。该薄膜是一种高阻隔、透明、辐射灭菌稳定、不发黄、可热成型、符合EP和FDA标准的薄膜。产品接触层是不含添加剂的聚乙烯,用于容器的非肠道和生理制剂,具有较低的可提取性。PCTFE对水分、芳香族和脂肪族烃以及赋形剂具有很高的阻隔性。这种结构不吸收赋形剂。 A pharmaceutical-grade PE/EVOH/PCTFE flexible film, unconventionally bonded, is specially developed to contain demanding liquids. The film is a high barrier, transparent, radiation sterilization stable, non-yellowing, thermoformable and EP- and FDA-compliant film. The product contact layer is a polyethylene without additives for containers for parenteral and ophtalmic preparations, with a low extractables profile. PCTFE offers the high barrier to moisture and to aromatic and aliphatic hydrocarbon species and excipients. The construction does not absorb excipients. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
尺寸稳定性 dimensional stability 2 |
|||
TD,140℃ TD,140℃ |
-4.0 | % | |
MD,140℃ MD,140℃ |
4.0 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
摩擦系数 Frictional coefficient 3 |
0.60 | ||
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
薄膜厚度 film thickness 4 |
150 | µm | |
拉伸强度 tensile strength |
|||
MD,屈服 MD, yield |
18.0 | MPa | |
TD,屈服 TD, yield |
MPa | ||
氧气传输速率 Oxygen transfer rate 5 |
|||
23℃,90% RH 23℃,90% RH 5 |
cm³/m²/24 hr | ||
水气透过率 Water vapor transmittance |
|||
38℃,90% RH 38℃,90% RH |
g/m²/24 hr | ||
光学性能 OPTICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
透光率 Light Transmission |
|||
450 nm 450 nm |
% | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Roll Width Roll Width 6 |
cm |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 10 minutes |
3 Mat Finish |
4 Thickness tolerance: ±10% |
5 100% O2 |
6 Roll width tolerance: ±1.5 mm |
【新闻资讯】查看全部 ![]()
人工智能竟发展到如此地步 机器人竟然可以写稿?
2021-06-14 搜料网资讯: 上世纪80年代《终结者》上映时,人工智能似乎还在遥不可及。今年以来,一系列人工智能大事件使人们意识到奇点将至,它已开始介入人们的生活:今年3月,AlphaGo击败了 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |