公司信息及水印
| 牌号简介 About |
|---|
| Kraton D1161 K是一种基于苯乙烯和异戊二烯的透明线性三嵌段共聚物,聚苯乙烯含量为15%。它由北美提供,其物理形式如下所示。Kraton D1161 KT-作为粉末多孔颗粒提供,Kraton D1161 Ku-作为未经强化多孔颗粒提供,Kraton D1161 K用作配制粘合剂、密封剂和涂层的成分。它也可以用作沥青或热塑性塑料的改性剂和化合物配方。 Kraton D1161 K is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied from North America in the physical form identified below. Kraton D1161 KT - supplied as a dusted porous pellet Kraton D1161 KU - supplied as an undusted porous pellet Kraton D1161 K is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations. |
| 技术参数 Technical Data | |||
|---|---|---|---|
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density |
0.920 | g/cm³ | ASTM D4025 |
|
熔体质量流动速率 Melt Flow Rate |
|||
|
200℃,5.0kg 200℃,5.0kg |
12 | g/10min | |
|
结合苯乙烯 Combined with styrene |
14.0 到 17.0 | % | 内部方法 |
|
Antioxidant Additive Antioxidant Additive |
0.080 到 0.30 | % | 内部方法 |
|
Total Extractables Total Extractables |
注册或登录后
所有资料免费
|
% | 内部方法 |
|
灰份含量 Ash Content |
注册或登录后
所有资料免费
|
||
|
T,滑石 T. Talc |
注册或登录后
所有资料免费
|
% | 内部方法 |
|
挥发物 Volatiles |
注册或登录后
所有资料免费
|
% | 内部方法 |
|
粘度 viscosity 2 |
注册或登录后
所有资料免费
|
||
|
25℃ 25℃ 2 |
注册或登录后
所有资料免费
|
Pa·s | 内部方法 |
|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
邵氏硬度 Shore hardness |
注册或登录后
所有资料免费
|
||
|
邵氏 A,10 秒,模压成型 Shaw A, 10 seconds, molded |
注册或登录后
所有资料免费
|
ASTM D2240 | |
|
弹性体 Elastomer |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
拉伸强度 tensile strength 3 |
注册或登录后
所有资料免费
|
||
|
屈服 yield 3 |
注册或登录后
所有资料免费
|
MPa | ASTM D412 |
|
300% 应变 300% strain 3 |
注册或登录后
所有资料免费
|
MPa | ASTM D412 |
|
拉伸应变 Tensile strain 3 |
注册或登录后
所有资料免费
|
||
|
断裂 fracture 3 |
注册或登录后
所有资料免费
|
% | ASTM D412 |
|
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
Diblock Content Diblock Content |
注册或登录后
所有资料免费
|
||
|
Styrene/Rubber ratio Styrene/Rubber ratio |
注册或登录后
所有资料免费
|
||
| 备注 |
|---|
| 1 一般属性:这些不能被视为规格。 |
| 2 25% in toluene solution |
| 3 Typical properties determined on film cast from toluene solution. |
|
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |















支付宝
微信支付