公司信息及水印
| 牌号简介 About |
|---|
| 线性SIS三嵌段和Si二嵌段共聚物的混合物。含有约42%的硅二嵌段共聚物。低苯乙烯,低模量。载体4114A和VECTOR® 4114N苯乙烯嵌段共聚物是由线性SIS三嵌段共聚物和Si二嵌段共聚物组成的混合物。它们比载体4113A SIS/Si更软,因为二嵌段含量更高,因此非常适合用于热熔压敏粘合剂、弹性体化合物和光聚合板应用。载体4114A SIS/Si以美国提供的致密颗粒形式提供。VECTOR® 4114N SIS/Si是由中国提供的多孔颗粒。 Blend of linear SIS triblock and SI diblock copolymer. Contains ~42% SI diblock copolymer. Low styrene, very low modulus. VECTOR 4114A and VECTOR 4114N styrenic block copolymers are blended products composed of a linear SIS triblock copolymer and an SI diblock copolymer. They are softer than VECTOR 4113A SIS/SI due to higher diblock content, making them well-suited for use in hot melt pressure sensitive adhesives, elastomer compounds and photopolymer plate applications. VECTOR 4114A SIS/SI is offered as a dense pellet supplied from the United States. VECTOR 4114N SIS/SI is offered as a porous pellet supplied from China. |
| 技术参数 Technical Data | |||
|---|---|---|---|
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density |
0.918 | g/cm³ | ASTM D792 |
|
表观密度 Apparent density |
0.33 | g/cm³ | ASTM D1895 |
|
熔体质量流动速率 Melt Flow Rate |
|||
|
200℃,5.0kg 200℃,5.0kg |
25 | g/10min | ASTM D1238 |
|
结合苯乙烯 Combined with styrene |
15.0 | % | |
|
灰份含量 Ash Content |
注册或登录后
所有资料免费
|
% | |
|
溶液粘度 Solution viscosity |
注册或登录后
所有资料免费
|
||
|
25wt%甲苯,25℃ 25wt% toluene, 25 ℃ |
注册或登录后
所有资料免费
|
mPa·s | |
|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
邵氏硬度 Shore hardness |
注册或登录后
所有资料免费
|
||
|
邵氏 A,1 秒,模压成型 Shore A, 1 second, molded |
注册或登录后
所有资料免费
|
ASTM D2240 | |
|
弹性体 Elastomer |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
拉伸强度 tensile strength 2 |
注册或登录后
所有资料免费
|
||
|
断裂 fracture 2 |
注册或登录后
所有资料免费
|
MPa | 内部方法 |
|
300% 应变 300% strain 2 |
注册或登录后
所有资料免费
|
MPa | 内部方法 |
|
拉伸应变 Tensile strain 2 |
注册或登录后
所有资料免费
|
||
|
断裂 fracture 2 |
注册或登录后
所有资料免费
|
% | 内部方法 |
|
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
Diblock Content Diblock Content |
注册或登录后
所有资料免费
|
wt% | |
| 备注 |
|---|
| 1 一般属性:这些不能被视为规格。 |
| 2 Compression Molded |
|
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |














支付宝
微信支付