
公司信息及水印






牌号简介 About |
---|
Techsil® RTV27909是一种配套的易浇注、无气孔、清澈无色的双组分有机硅凝胶。在A和B部分以1∶1的混合比例混合后,该材料在室温下通过对具有良好阻尼减振性能的粘性硅胶的加成反应而非常快地固化。性能:方便1:1的混合,低粘度,无溶剂,室温快速固化,柔软,粘性凝胶,粘在许多基材上,机械冲击和减振性能,有效温度范围为50°C至150°C的应用:Techsil® RTV27909是专门开发用于电子灌封应用,如混合IC绝缘。n,需要在室温下快速固化时对电源模块和传感器进行封装。 Techsil RTV27909 is a kit matched easily pourable, solvent free, clear and colourless two-component silicone gel. After mixing the A and the B part at a mix ratio of 1: 1 the material cures very fast at room temperature by an addition reaction to a tacky silicone gel with excellent vibration dampening properties. Properties: Convenient 1:1 mixing by weight Low viscosity, free of solvents Fast room temperature cure Soft, tacky gel, sticking to many substrates Mechanical shock and vibration damping properties Useful temperature range -50°C to 150°C Applications: Techsil RTV27909 is specially developed for electronic potting applications such as hybrid IC insulation, potting of power modules and sensors when fast cure at room temperature is required. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.980 | g/cm³ | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
线性热膨胀系数 Coeff.of linear therm expansion |
|||
MD MD |
3.0E-4 | 1/℃ | |
导热系数 Thermal Conductivity |
0.17 | W/m/K | |
使用温度 Operating temperature |
-50 到 150 | ℃ | |
电气性能 ELECTRICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
相比漏电起痕指数 Comparative Tracking Index |
> 600 | V | |
光学性能 OPTICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
折射率 Refractive index |
|||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 Color |
|||
-- -- 2 |
|||
-- -- 3 |
|||
重量混合比(PBW) Weight Mix Ratio (PBW) |
|||
Part A Part A |
|||
Part B Part B |
|||
密度 Density |
|||
-- -- 2 |
g/cm³ | ||
-- -- 3 |
g/cm³ | ||
粘度 viscosity |
|||
-- -- 2 |
Pa·s | ||
-- -- 3 |
Pa·s | ||
-- -- 4 |
Pa·s | ||
储存稳定性 storage stability |
|||
23℃ 23℃ |
min | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
耐电强度 Electric strength |
kV/mm | ||
相对电容率 Relative permittivity |
|||
60 Hz 60 Hz |
|||
体积电阻率 Volume resistivity |
ohms·cm | ||
耗散因数 Dissipation factor |
|||
60 Hz 60 Hz |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Part B |
3 Part A |
4 Mixed |
【新闻资讯】查看全部
聚氨酯行业高景气有望延续
2017-07-18 供给端:新增产能主要来自国内 全球MDI产能稳步增长。16年产能达到859万吨,同比增长4.76%。06-16全球MDI产能年均复合增长率为7.94%。目前全球MDI产能主要分布于中国、美国、德国、日本、韩国等。主要企业有万华(204万吨)、科思创(171万吨)、巴斯夫(171万吨)、亨斯曼(106万吨)等,这四家企业产能规模为652万吨,其产能占全球总产能比重为76%。目前从全球看部分企业有扩产计划,其中国内在建产能154万吨,国外在建产能130万吨,扩建、新建产能将于1 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |