
公司信息及水印






牌号简介 About |
---|
特氟隆AF是一个非晶态含氟聚合物家族。这些材料在光学清晰度和机械性能(包括强度)方面与其他非晶态聚合物相似。它们在不同温度范围内的性能、出色的电性能和耐化学性也与含氟聚合物相似。它们不同于其他含氟聚合物,因为它们可溶于选定的溶剂,具有高透气性、高压缩性、高蠕变阻力和低导热性。它们具有任何已知含氟聚合物的最低介电常数。 Teflon® AF is a family of amorphous fluoropolymers. These materials are similar to other amorphous polymers in optical clarity and mechanical properties, including strength. They also resemble fluoropolymers in their performance over a wide range of temperatures, outstanding electrical properties, and chemical resistance. They are distinct from other fluoropolymers in that they are soluble in selected solvents and have high gas permeability, high compressability, high creep resistance, and low thermal conductivity. They have the lowest dielectric constant of any known fluoropolymer. |
技术参数 Technical Data | |||
---|---|---|---|
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
氧传输速率 Oxygen transfer rate |
990 | Barrer | |
二氧化碳渗透性 Carbon dioxide permeability |
2800 | Barrer | |
氮传输速率 Nitrogen transfer rate |
490 | Barrer | |
Water Permeation Water Permeation |
4030 | Barrer | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 HDT |
ASTM D648 | ||
0.45 MPa,未退火 0.45 MPa, unannealed |
200 | ℃ | ASTM D648 |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
玻璃化转变温度 Glass transition temperature |
℃ | ASTM D3418 | |
线性热膨胀系数 Coeff.of linear therm expansion |
|||
MD MD |
1/℃ | ASTM E831 | |
电气性能 ELECTRICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
ASTM D150 | ||
耗散因数 Dissipation factor |
ASTM D150 | ||
光学性能 OPTICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
折射率 Refractive index |
ASTM D542 | ||
透光率 Light Transmission |
% | ASTM D1003 | |
色散系数 Dispersion coefficient |
|||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
接触角 contact angle |
|||
with Water with Water |
° | ||
表面能 Surface energy |
dyne/cm | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
ASTM D2240 | ||
邵氏 D,23℃ Shore D, 23 ℃ |
ASTM D2240 | ||
邵氏 D,220℃ Shaw's D, 220 ℃ |
ASTM D2240 | ||
洛氏硬度 Rockwell hardness |
|||
23℃ 23℃ |
ASTM D785 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
ASTM D638 | ||
屈服,23℃ Yield, 23 ℃ |
MPa | ASTM D638 | |
屈服,220℃ Yield, 220 ℃ |
MPa | ASTM D638 | |
23℃ 23℃ |
MPa | ASTM D638 | |
220℃ 220℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
ASTM D638 | ||
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
断裂,220℃ Fracture, 220 ℃ |
% | ASTM D638 | |
弯曲模量 Flexural Modulus |
ASTM D790 | ||
23℃ 23℃ |
MPa | ASTM D790 | |
150℃ 150℃ |
MPa | ASTM D790 | |
泰伯耐磨性 Taber Abrasion |
|||
2000 周期 2000 cycles |
mg | ||
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
g/cm³ | ASTM D792 | |
吸水率 Water Absorption |
|||
24hr 24hr |
% | ASTM D570 | |
熔体表观粘度 Apparent viscosity of melt |
|||
350℃,100 sec^-1 350℃,100 sec^-1 |
Pa·s | ASTM D3835 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部 ![]()
常用塑料助剂紫外线吸收剂的物理功能
2017-10-13 紫外线吸收剂是一种起光稳定作用的塑料助剂稳定剂,借吸收和转化太阳光中具有破坏性的紫外光部分而产生稳定效果。在包装食品的薄膜中有时也加紫外线吸收剂,以便抑制紫外光对被包装物品的作用。 一般情况下,若薄膜中不加紫外线吸收剂,在户外使用时,两个月就开始变脆,当加入紫外线吸收剂后,则可延至十三个月后薄膜伸长率才开始急剧下降,薄膜使用寿命也可达一年以上。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |