公司信息及水印
| 牌号简介 About |
|---|
| Tefzel® 200 是一种通用的聚四氟乙烯(ETFE)塑料材料。具有良好的韧性,高的冲击强度,良好的介电性能和水解稳定性。具有耐化学性、中等流量和耐磨损、耐候性和高能量辐射性。Tefzel® 200可通过熔融挤出、注射、压缩、转移和吹塑成型加工而成。用于电子元件,如套管、线圈、插座、连接器、开关、实验室仪器,如阀门、容器和盘子、电池或仪器组件、密封压盖、阀门组件、管塞、波纹管和薄膜。符合美国环境保护署(EPA)2010/15 PFOA法规。 DuPont™ Tefzel ® fluoropolymer 200 is a general purpose resin available in translucent, 2.5-mm (0.1-in.) pellets. Compared to other grades of Tefzel ®, its most unique features are an intermediate flow rate and a balance of properties that make it suitable for a variety of processes and demanding end uses. Tefzel ® 200 and the other Tefzel ® fluoropolymers are melt processible, modified copolymers of ethylene and tetrafluoroethylene. They are highperformance resins that can be processed at relatively high rates compared to fluorocarbon resins. They are mechanically tough and offer an excellent balance of properties. Tefzel ® 200 can perform successfully in applications where other thermoplastics are lacking in mechanical toughness, broad thermal capability, ability to meet difficult environmental conditions, or limited by fabricating problems. Properly processed products made from virgin Tefzel ® 200 are inert to most solvents and chemicals, hydrolytically stable and weather resistant. Recommended upper service temperature is 150°C (302°F); useful properties are retained at cryogenic ranges. The level and stability of dielectric properties are excellent and the flame rating is V-0 by the UL94 method. Mechanical properties include outstanding impact strength, cut-through and abrasion resistance. High energy radiation resistance meets IEEE 383 and the resin is approved for nuclear power plant use. Statements, or data, regarding behavior in a flame situation are not intended to reflect hazards presented by this or any other material when under actual fire conditions. Typical End Products Tefzel ® 200 is ideal for many end products, including electrical components, such as sleeving, coil forms, sockets, connectors and switches; lab ware, such as tubing, valves, containers and dishes; battery or instrument components that require chemical inertness; chemical service items, such as valve components, seal glands, pipe plugs and corrugated tubing; and film. Tefzel® 200 is ASTM D3159 Type I, Grade 1. |
| 技术参数 Technical Data | |||
|---|---|---|---|
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density |
1.70 | g/cm³ | ASTM D792 |
|
熔体质量流动速率 Melt Flow Rate |
|||
|
297℃,5.0kg 297℃,5.0kg |
7.0 | g/10min | ASTM D3159 |
|
吸水率 Water Absorption |
|||
|
24hr 24hr |
7.0E-3 | % | ASTM D570 |
|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
邵氏硬度 Shore hardness |
注册或登录后
所有资料免费
|
||
|
邵氏 D Shaw's D |
注册或登录后
所有资料免费
|
ASTM D2240 | |
|
拉伸强度 tensile strength |
注册或登录后
所有资料免费
|
||
|
23℃ 23℃ |
注册或登录后
所有资料免费
|
MPa | ASTM D3159 |
|
拉伸应变 Tensile strain |
注册或登录后
所有资料免费
|
||
|
断裂,23℃ Fracture, 23 ℃ |
注册或登录后
所有资料免费
|
% | ASTM D3159 |
|
弯曲模量 Flexural Modulus |
注册或登录后
所有资料免费
|
||
|
23℃ 23℃ |
注册或登录后
所有资料免费
|
MPa | ASTM D790 |
|
压缩强度 compressive strength |
注册或登录后
所有资料免费
|
MPa | ASTM D695 |
|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
悬臂梁缺口冲击强度 Izod Notched Impact strength |
注册或登录后
所有资料免费
|
||
|
23℃ 23℃ |
注册或登录后
所有资料免费
|
ASTM D256 | |
|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
熔融温度 Melting temperature |
注册或登录后
所有资料免费
|
℃ | ASTM D3159 |
|
线性热膨胀系数 Coeff.of linear therm expansion |
注册或登录后
所有资料免费
|
||
|
MD:0~100℃ MD:0~100℃ |
注册或登录后
所有资料免费
|
1/℃ | ASTM E831 |
|
最高使用温度 Max. usage temperature |
注册或登录后
所有资料免费
|
℃ | UL 746 |
|
电气性能 ELECTRICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
体积电阻率 Volume resistivity |
注册或登录后
所有资料免费
|
ohms·cm | ASTM D257 |
|
介电强度 Dielectric strength |
注册或登录后
所有资料免费
|
||
|
0.25 mm 0.25 mm |
注册或登录后
所有资料免费
|
kV/mm | ASTM D149 |
|
介电常数 Dielectric constant |
注册或登录后
所有资料免费
|
||
|
23 ℃,1 MHz 23 ℃,1 MHz |
注册或登录后
所有资料免费
|
ASTM D1531 | |
|
耗散因数 Dissipation factor |
注册或登录后
所有资料免费
|
||
|
23℃,1 MHz 23℃,1 MHz |
注册或登录后
所有资料免费
|
ASTM D1531 | |
|
耐电弧性 Arc resistance |
注册或登录后
所有资料免费
|
sec | ASTM D495 |
|
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
极限氧指数 Oxygen Index |
注册或登录后
所有资料免费
|
% | ASTM D2863 |
| 备注 |
|---|
| 1 一般属性:这些不能被视为规格。 |
| 2 68°F |
|
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |















支付宝
微信支付