
公司信息及水印






牌号简介 About |
---|
Menzolit® SMC 0400是一种基于不饱和聚酯树脂的片状模塑料。该产品是玻璃纤维增强,含有矿物填料。如果发生火灾,产品不会熔化,也不会形成液滴,也不会产生过量的烟雾。这种材料是在加热的钢模中压缩成型的。必须使用镀铬工具。该产品不含卤素或重金属。Menzolit® SMC 0400是一种A级SMC,适用于汽车、LCV和卡车的外部车身应用。这些复合材料可成型为具有良好的表面质量的零件,用于中等程度的在线和离线烘烤涂漆(100-140°C)车身板。产品表面无波纹、纤维图案、桔皮等缺陷。为了获得最高的表面质量,我们建议对工具表面进行镜面抛光。为了便于脱模,我们强烈建议对工具表面进行镀铬处理。Menzolit® SMC 0400允许。该产品与涂料或模内涂料有很好的粘合性。由于其零收缩特性,消除了翘曲变形,并可生产出可复制冷模尺寸的零件。 Menzolit® SMC 0400 is a sheet moulding compound based on unsaturated polyester resin. The product is glass fibre reinforced and contains mineral fillers. In case of fire the product doesn't melt, neither does it form droplets nor is smoke generation excessive. The material is compression moulded in heated steel moulds. It is a must to work with chrome plated tools. The product contains no halogens or heavy metals. Menzolit® SMC 0400 is a Class-A SMC for exterior body applications on cars, LCV´s and trucks. These compounds mould to parts with good up to excellent surface quality for medium bake in-line and off-line painted (100 - 140°C) body panels. Surface defects like waviness, fibre patterns and orange peel do not occur with this products. To achieve the highest surface quality, we recommend that tool surfaces are mirror polished. To ease demoulding we highly recommend chrome-plating of tool surfaces. Menzolit® SMC 0400 allows. The product shows very good adhesion to paint or In Mould Coating (IMC). Because of its zero shrink properties warpage is eliminated and parts reproducing the dimensions of the cold mould can be produced. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.90 | g/cm³ | ISO 1183 |
收缩率 Shrinkage |
|||
-- -- |
-0.050 | % | ISO 2577 |
-- -- 2 |
0.0 | % | DIN 53464 |
吸水率 Water Absorption |
|||
饱和,23℃ Saturation, 23 ℃ |
< 0.50 | % | ISO 62 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
模压成型 Compression Molding |
11000 | MPa | ISO 527-2 |
拉伸强度 tensile strength |
|||
屈服,模压成型 Yield, molding |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂,模压成型 Fracture, molded |
% | ISO 527-2 | |
弯曲模量 Flexural Modulus |
|||
模压成型 Compression Molding |
MPa | ISO 178 | |
弯曲强度 Flexural Strength |
|||
模压成型 Compression Molding |
MPa | ISO 178 | |
压缩强度 compressive strength |
MPa | ISO 14126 | |
泊松比 Poisson's ratio |
内部方法 | ||
Matrix Crazing Strain Matrix Crazing Strain |
% | 内部方法 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
模压成型 Compression Molding |
kJ/m² | ISO 179 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 HDT |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
连续使用温度 Continuous use temperature |
℃ | ISO 14126 | |
玻璃化转变温度 Glass transition temperature |
℃ | DSC | |
线性热膨胀系数 Coeff.of linear therm expansion |
|||
MD MD |
1/℃ | ISO 11359-2 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
3.00 mm 3.00 mm |
UL 94 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Post Molding Shrinkage |
【新闻资讯】查看全部
石墨烯无望助于手机降温增长运用寿命
2015-11-25 导读: 手机越用越热,电池越用越短,有望被一种叫做石墨烯的热门新材料破解。在近日举行的上海科普大讲坛聚焦21世纪的“新材料之王”上,瑞典皇家工程科学院刘建影院士透露,科学家正在尝试给智能手机的电子器件“穿上”石墨烯“外衣”,有望将智能手机的散射能力以及电池续航能力增强50%以上。 手机越用越热,电池越用越短,有望被一种叫做石墨烯的热门新材料破解。在近日举行的上海科普大讲坛聚焦21世纪的“新材料之王”上,瑞典皇家工程科学院院士刘建影透露,科学家正在尝试给智能手机的电子器件“穿 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |