
公司信息及水印






牌号简介 About |
---|
CONATHANE® EN-7和EN-8是双组分、非MBOCA基、高强度液态聚氨酯树脂系统,旨在确保暴露在极端环境中的电气/电子组件的性能。由这些系统制备的弹性体具有以下优异的性能:优异的水解稳定性、低粘度、耐真菌性、优异的介电性能、抗热震性、高强度、高延伸率。建议将这些系统用作电缆、连接器、模块的成型和封装化合物。线绕器件、应变敏感器件以及印刷电路用100%固体涂层。它们对大多数基材的优良粘附性和良好的柔韧性也表明它们可以用作锁固和嵌缝粘合剂。 CONATHANE EN-7 and EN-8 are two-component, non MBOCA based, high strength liquid polyurethane resin systems designed to ensure the performance of electrical/electronic assemblies exposed to severe environmental extremes. Elastomers prepared from these systems exhibit the following outstanding properties: Superior hydrolytic stability Low viscosity Fungus resistance Exceptional dielectric properties Thermal shock resistance High strength High elongation These systems are recommended for use as molding and potting compounds for electrical cables, connectors, modules, wire wound devices, strain sensitive devices, as well as 100% solids coatings for printed circuitry. Their excellent adhesion to most substrates, and good flexibility, also suggest their use as staking and filleting adhesives. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.01 | g/cm³ | ASTM D792 |
吸水率 Water Absorption |
ASTM D570 | ||
25℃,24hr 25℃,24hr |
0.20 | % | ASTM D570 |
饱和,25℃ Saturation, 25 ℃ 2 |
0.43 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
注册或登录后
所有资料免费
|
||
邵氏 A Shaw's A |
注册或登录后
所有资料免费
|
ASTM D2240 | |
弹性体 Elastomer |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
注册或登录后
所有资料免费
|
||
屈服 yield |
注册或登录后
所有资料免费
|
MPa | ASTM D412 |
100% 应变 100% strain |
注册或登录后
所有资料免费
|
MPa | |
300% 应变 300% strain |
注册或登录后
所有资料免费
|
MPa | |
拉伸应变 Tensile strain |
注册或登录后
所有资料免费
|
||
断裂 fracture |
注册或登录后
所有资料免费
|
% | ASTM D412 |
撕裂强度 tear strength 3 |
注册或登录后
所有资料免费
|
kN/m | ASTM D624 |
压缩形变 Compression deformation |
注册或登录后
所有资料免费
|
||
70℃,22 hr 70℃,22 hr |
注册或登录后
所有资料免费
|
% | ASTM D395 |
老化性能 Aging property |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热老化 Heat aging |
注册或登录后
所有资料免费
|
||
% Wt. Gain after 7 days @ 135℃ % Wt. Gain after 7 days @ 135℃ |
注册或登录后
所有资料免费
|
% | |
电气性能 ELECTRICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
注册或登录后
所有资料免费
|
ohms | ASTM D257 |
体积电阻率 Volume resistivity |
注册或登录后
所有资料免费
|
||
25 ℃ 25 ℃ |
注册或登录后
所有资料免费
|
ohms·cm | ASTM D257 |
介电强度 Dielectric strength |
注册或登录后
所有资料免费
|
||
25 ℃,1.59 mm 25 ℃,1.59 mm |
注册或登录后
所有资料免费
|
kV/mm | |
介电常数 Dielectric constant |
注册或登录后
所有资料免费
|
ASTM D150 | |
25 ℃,100 Hz 25 ℃,100 Hz |
注册或登录后
所有资料免费
|
ASTM D150 | |
25 ℃,1 kHz 25 ℃,1 kHz |
注册或登录后
所有资料免费
|
ASTM D150 | |
25 ℃,1 MHz 25 ℃,1 MHz |
注册或登录后
所有资料免费
|
ASTM D150 | |
耗散因数 Dissipation factor |
注册或登录后
所有资料免费
|
ASTM D150 | |
25℃,100 Hz 25℃,100 Hz |
注册或登录后
所有资料免费
|
ASTM D150 | |
25℃,1 kHz 25℃,1 kHz |
注册或登录后
所有资料免费
|
ASTM D150 | |
25℃,1 MHz 25℃,1 MHz |
注册或登录后
所有资料免费
|
ASTM D150 | |
耐电弧性 Arc resistance |
注册或登录后
所有资料免费
|
sec | ASTM D495 |
绝缘电阻 insulation resistance |
注册或登录后
所有资料免费
|
ohms | 内部方法 |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
冷热冲击测试 Test - 10 cycles,Olyphant washer -70℃ to 130℃ Cold and hot shock test -10 cycles, Olympic water -70 ℃ to 130 ℃ |
注册或登录后
所有资料免费
|
||
抗真菌性 Antifungal activity |
注册或登录后
所有资料免费
|
||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Linear Shrinkage Linear Shrinkage |
注册或登录后
所有资料免费
|
% | 内部方法 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 30 days |
3 C 模具 |
【新闻资讯】查看全部 ![]()
长岭炼化聚丙烯成品包装线改造项目中交
2021-04-02 搜料网资讯: 3月28日,长岭炼化聚丙烯装置成品包装线改造项目通过安全、环保、质量等多项验收,顺利中交进入设备调试阶段,为企业多产快出聚丙烯产品提供了硬件支撑。 长岭炼化 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |