
公司信息及水印






牌号简介 About |
---|
Eastman Neostar弹性体FN005是一种坚硬、透明、耐用的通用级共聚酯醚。它设计用于型材和汽车市场,但也用于需要韧性和抗弯曲裂纹的包装和管道应用。Eastman Neostar弹性体FN005可用于注塑和铸膜或管材挤出应用,也可用于在恶劣环境中要求强度、耐久性和抗穿刺性的任何应用。这种共聚酯结合了韧性,透明度和灵活性,而不添加增塑剂。Eastman Neostar弹性体FN005因其非卤化材料成分而被视为环境首选。本产品的目标固有粘度为1.05。本产品经银级认证。摇篮到摇篮认证标志是一个注册的认证标志,根据McDonough Braungart Design Chemistry(MBDC)的许可使用。MBDC是一家全球可持续发展咨询和产品认证公司。从摇篮到摇篮的框架超越了减少商业的负面影响(“生态效率”)的传统目标,转向了增加其正面影响(“生态效率”)的新范式。在其核心,从摇篮到摇篮的设计将自然“生物代谢”的安全和生产过程视为开发工业材料“技术代谢”流程的模型。产品成分可作为生物和技术营养素在这些代谢中持续回收和再利用。有关MBDC的更多信息,以及获得伊斯曼共聚酯的可打印证书,请访问www.mbdc.com。在C2C认证产品中选择公司名称下的Eastman Chemical Company,以显示我们的产品列表。 Eastman Neostar™ Elastomer FN005 is a tough, clear, durable, general purpose grade copolyester ether. It was designed for use in the profile and automotive markets, but is also used in packaging and tubing applications where toughness and flex-crack resistance are required. Eastman Neostar™ Elastomer FN005 can be used in injection molding and cast film or tubing extrusion applications or in any application that demands strength, durability, and puncture resistance in harsh environments. This copolyester combines toughness, clarity, and flexibility without the addition of plasticizers. Eastman Neostar™ Elastomer FN005 is considered environmentally preferred because of its non-halogenated material composition. The target inherent viscosity of this product is 1.05. This product has been CRADLE TO CRADLE CERTIFIED Silver. The CRADLE TO CRADLE CERTIFIED Mark is a registered certification mark used under license through McDonough Braungart Design Chemistry (MBDC). MBDC is a global sustainability consulting and product certification firm. The CRADLE TO CRADLE® framework moves beyond the traditional goal of reducing the negative impacts of commerce ('eco-efficiency'), to a new paradigm of increasing its positive impacts ('eco-effectiveness'). At its core, Cradle to Cradle design perceives the safe and productive processes of nature's 'biological metabolism' as a model for developing a 'technical metabolism' flow of industrial materials. Product components can be designed for continuous recovery and reutilization as biological and technical nutrients within these metabolisms. For more information about MBDC and to obtain printable certificates for Eastman Copolyesters, visit www.mbdc.com. Choose Eastman Chemical Company under Company Name in C2C Certified products to display a list of our products. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.13 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
20 | g/10min | ASTM D1238 |
吸水率 Water Absorption |
|||
23℃,24hr 23℃,24hr |
0.35 | % | ASTM D570 |
固有粘度 Intrinsic viscosity 2 |
|||
23℃ 23℃ 2 |
1.1 | 内部方法 | |
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
薄膜厚度 film thickness |
|||
测试 test |
130 | µm | |
割线模量 Secant modulus |
ASTM D882 | ||
正切,MD:130 µm Tangent, MD: 130 µ m |
MPa | ASTM D882 | |
正切,TD:130 µm Tangent, TD: 130 µ m |
MPa | ASTM D882 | |
拉伸强度 tensile strength |
ASTM D882 | ||
MD,屈服,130 µm MD, yield, 130 µ m |
MPa | ASTM D882 | |
TD,屈服,130 µm TD, yield, 130 µ m |
MPa | ASTM D882 | |
MD,断裂,130 µm MD, fracture, 130 µ m |
MPa | ASTM D882 | |
TD,断裂,130 µm TD, fracture, 130 µ m |
MPa | ASTM D882 | |
拉伸应变 Tensile strain |
ASTM D882 | ||
MD,屈服,130 µm MD, yield, 130 µ m |
% | ASTM D882 | |
TD,屈服,130 µm TD, yield, 130 µ m |
% | ASTM D882 | |
MD,断裂,130 µm MD, fracture, 130 µ m |
% | ASTM D882 | |
TD,断裂,130 µm TD, fracture, 130 µ m |
% | ASTM D882 | |
透氧率 Oxygen permeability |
|||
30℃,130 µm 30℃,130 µm |
cm³/m²/24 hr | ASTM D1434 | |
水蒸气透过性 Water vapor permeability 5 |
g/m²/24 hr | ASTM F372 | |
弹性体 Elastomer |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
卡-伯模量 Kappa's modulus |
ASTM D1043 | ||
-70℃ -70℃ |
MPa | ASTM D1043 | |
-28℃ -28℃ |
MPa | ASTM D1043 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Izod Notched Impact strength |
|||
-40℃ -40℃ |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Brittle Temperature |
℃ | ASTM D746 | |
玻璃化转变温度 Glass transition temperature |
℃ | DSC | |
维卡软化温度 Vicat Softening Temperature |
℃ | ASTM D1525 6 | |
熔融峰值温度 Melting peak temperature |
℃ | ASTM D3418 | |
结晶峰温度 Crystallization peak temperature |
|||
DSC DSC |
℃ | DSC | |
线性热膨胀系数 Coeff.of linear therm expansion |
|||
MD:23℃ MD:23℃ |
1/℃ | ASTM D696 | |
比热 specific heat |
DSC | ||
25℃ 25℃ 7 |
J/kg/℃ | DSC | |
100℃ 100℃ 7 |
J/kg/℃ | DSC | |
150℃ 150℃ 7 |
J/kg/℃ | DSC | |
175℃ 175℃ 7 |
J/kg/℃ | DSC | |
200℃ 200℃ 8 |
J/kg/℃ | DSC | |
225℃ 225℃ 9 |
J/kg/℃ | DSC | |
导热系数 Thermal Conductivity |
|||
23℃ 23℃ |
W/m/K | ASTM C177 | |
融合热量 Fusion heat |
|||
23℃ 23℃ |
kJ/kg | ASTM E793 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
撕裂强度 tear strength |
|||
23℃ 23℃ |
N | ASTM D1004 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
ASTM D2240 | ||
邵氏 A,23℃ Shore A, 23 ℃ |
ASTM D2240 | ||
邵氏 D,23℃ Shore D, 23 ℃ |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
|||
23℃ 23℃ |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
ASTM D638 | ||
屈服,23℃,3 mm,注塑成型 Yield, 23 ℃, 3 mm, injection molding 3 |
MPa | ASTM D638 | |
断裂,23℃,2 mm Fracture, 23 ℃, 2 mm 4 |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
ASTM D638 | ||
屈服,23℃ Yield, 23 ℃ |
% | ASTM D638 | |
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
弯曲模量 Flexural Modulus |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
摩擦系数 Frictional coefficient 5 |
ASTM D1894 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 EMN-A-AC-G-V-1 |
3 类型 1, 20 in/min |
4 类型 4, 20 in/min |
5 0.13 mm |
6 压 力1 (10N) |
7 Solid |
8 Transition, apparent specific heat, including the effects of the heat of fusion. |
9 Melt |
【新闻资讯】查看全部 ![]()
荷兰研讨更环保、更低廉生物基塑料包装资料
2017-07-13 据《今日塑料》报道,荷兰一研究项目正致力于生产一种环保的、成本更低的生物基塑料包装材料,并计划在两年内实现商用。 一项新的研究目标旨在生产一种具有价格竞争力的、使用生物基塑料制成的透明包装袋。生物基塑料通常不适合用于薄壁包装的注塑成型。 |
荷兰研讨更环保、更低廉生物基塑料包装资料 据《今日塑料》报导,荷兰一科学研究新项目正着眼于生产制造一种环境保护的、成本费更低的生物基塑料包装原材料,并方案在2年内完成商用。 一项新的研究方案致力于生产制造一种具备价钱竞争能力的、应用生物基塑料做成的全透明包装袋。生物基塑料一般 不宜用以厚壁包装的注塑工艺。 荷兰科学研究更环境保护、更便宜生物基塑料包装原材料 由于生物基原材料的成本费较高,食品类生产商对其的兴趣爱好通常不高。但是,SFA企业主管NielsL’Abée说明:“任何人都觉得大家应当应用更环境保护的包装。”荷兰SFA包装企业是一家专为食品类出示注塑加工包装的经销商。 因而,L’Abée决策与荷兰的瓦赫宁根高校及研究所(WageningenUniversity&Research)的属下组织――瓦赫宁根食品类与生物研究所进行协作,找寻生物基塑料包装原材料商用更有诱惑力的方式 。 虽然针对食品类包装塑料薄膜来讲,生物基塑料充足坚毅,可是针对厚壁注塑工艺来讲却太过浓稠,因而此项目地合作方期待根据加防腐剂来更改其流通性。 除此之外,她们还将科学研究应用生物基原材料做成更薄产品的繁杂精细生产工艺流程。它是十分必须的,由于降低包装的厚度是减少包装原材料耗费及其控制成本的唯一方式。 因为生物基原材料只是可以隔绝水蒸汽,因而学者们还将加上附加的包装层,便于可以出示维持食材新鮮需要的隔绝特性。此项目地另一个关键总体目标取决于开发设计生物基塑料包装的降低成本生产制造方式 ,该生产制造方式 的CO2消耗量仅为基本塑料的1/2。 新项目合作伙伴期待可以在2年内将商品在销售市场上售卖。但是,针对更环境保护的包装原材料,顾客们想要多付款是多少钱财呢?L’Abée认可:“这一点大家并不了解,”另外他表明全部的新项目合作伙伴都会担负着生物基包装的开发设计风险性,“期待我们可以取得成功开发设计而且最后将其市场销售出来。” 来源于:我国塑料机械 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |
价格走势图
抱歉!该牌号暂无认证数据。
抱歉!暂无数据。
抱歉!暂无数据。