
公司信息及水印






牌号简介 About |
---|
Plexiglas Resist Ag 100是一种基于冲击改性聚甲基丙烯酸甲酯(PMMA)的非晶态热塑性模塑料。性能Plexiglas成型化合物具有以下典型性能:高耐候性、优异的透射率和清晰度、亮丽的外观、低重量、一半重量的玻璃100%可回收利用、最佳寿命周期评估,与玻璃和PC相比,Plexiglas Resistant AG 100具有良好的手感和声音。通过以下附加性能得出:最高断裂强度和冲击强度(比玻璃高30倍)提高了抗应力开裂性能平衡性能曲线在非常高和低温下明显减少了可逆雾度增加了负载下的热变形温度Ameca列表、校园和模具流量数据可用 PLEXIGLAS® Resist AG 100 is an amorphous thermoplastic molding compound, based on impact-modified polymethyl methacrylate (PMMA). Properties PLEXIGLAS® molding compounds have the following typical properties: high weather resistance excellent transmission and clarity brilliant appearance low weight - half the weight of glass 100% recyclable - best life cycle assessment as compared with glass and PC pleasant feel and sound of molded parts PLEXIGLAS® Resist AG 100 is characterized by the following additional properties: highest breaking strength and impact strength (30 times higher breaking strength than glass) improved resistance to stress cracking balanced property profile clear reduction of reversible haze at very high and low temperatures increased heat deflection temperature under load AMECA listing, CAMPUS and moldflow data available |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.16 | g/cm³ | ISO 1183 |
熔体体积流动速率 Melt Volume Rate |
|||
230℃,3.8 kg 230℃,3.8 kg |
1.10 | cm³/10min | |
260℃,3.8 kg 260℃,3.8 kg |
7.70 | cm³/10min | |
吸水率 Water Absorption |
|||
饱和,23℃ Saturation, 23 ℃ |
注册或登录后
所有资料免费
|
% | |
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
注册或登录后
所有资料免费
|
% | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
注册或登录后
所有资料免费
|
MPa | ISO 527-1-2 |
拉伸强度 tensile strength |
注册或登录后
所有资料免费
|
||
屈服 yield |
注册或登录后
所有资料免费
|
MPa | ISO 527-2/50 |
拉伸应变 Tensile strain |
注册或登录后
所有资料免费
|
||
屈服 yield |
注册或登录后
所有资料免费
|
% | ISO 527-2/50 |
标称拉伸断裂应变 Nominal tensile fracture strain |
注册或登录后
所有资料免费
|
% | ISO 527-2 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁无缺口冲击强度 Charpy Unnotched Impact strength |
注册或登录后
所有资料免费
|
||
23℃ 23℃ |
注册或登录后
所有资料免费
|
kJ/m² | ISO 179/1eU |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 HDT |
注册或登录后
所有资料免费
|
||
0.45 MPa,未退火 0.45 MPa, unannealed |
注册或登录后
所有资料免费
|
℃ | ISO 75-2/B |
1.8 MPa,未退火 1.8 MPa, unannealed |
注册或登录后
所有资料免费
|
℃ | ISO 75-2/A |
玻璃化转变温度 Glass transition temperature |
注册或登录后
所有资料免费
|
℃ | ISO 11357-2 |
维卡软化温度 Vicat Softening Temperature |
注册或登录后
所有资料免费
|
||
B50 B50 |
注册或登录后
所有资料免费
|
℃ | ISO 306 |
线性热膨胀系数 Coeff.of linear therm expansion |
注册或登录后
所有资料免费
|
||
MD:0~50℃ MD:0~50℃ |
注册或登录后
所有资料免费
|
1/℃ | ISO 11359-2 |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
1.60 mm 1.60 mm |
注册或登录后
所有资料免费
|
IEC 707 | |
光学性能 OPTICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
折射率 Refractive index |
注册或登录后
所有资料免费
|
ISO 489 | |
透光率 Light Transmission 2 |
注册或登录后
所有资料免费
|
% | ISO 13468-2 |
雾度 Haze |
注册或登录后
所有资料免费
|
% | ASTM D1003 |
备注 |
---|
2. D65 |
【新闻资讯】查看全部 ![]()
赢创全新的液态附着力树脂可降低涂料中VOC含量
2016-09-29 TEGO® AddBond食品接触适宜性通过FDA认证 降低涂料的粘度 赢创工业集团最新推出用于涂料配方中的附着力树脂TEGO® AddBond LP 1600和LP 1611。该产品具有优异的流动性能,并适宜与食品接触。这两种附着力树脂在降低粘度的同时不会提高涂料的挥发性有机化合物含量(V |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |