
公司信息及水印






牌号简介 About |
---|
应用开关、继电器、插座、线圈线轴、继电器、接线板、连接器、电源开关、小型断路器、插头管、点火线圈盖的示例其他特性:电气特性填充特性 Examples of application Switches, relays, sockets, coil bobbins, relays, terminal strips, connectors, power switches, compact breakers, plug pipes, ignition coil caps Other properties: Electrical properties Fill properties |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.88 到 1.92 | g/cm³ | JIS K6911 |
收缩率 Shrinkage |
0.60 到 1.0 | % | JIS K6911 |
吸水率 Water Absorption |
|||
boiling boiling |
0.15 到 0.35 | % | JIS K6911 |
23℃,24hr 23℃,24hr |
0.040 到 0.070 | % | JIS K6911 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
3.9 到 5.9 | kJ/m² | JIS K6911 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 HDT |
℃ | JIS K6911 | |
电气性能 ELECTRICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
kV/mm | JIS K6911 | |
介电常数 Dielectric constant |
|||
1 MHz 1 MHz |
JIS K6911 | ||
耗散因数 Dissipation factor |
|||
1 MHz 1 MHz |
JIS K6911 | ||
耐电弧性 Arc resistance |
sec | JIS K6911 | |
相比漏电起痕指数 Comparative Tracking Index |
V | IEC 60112 | |
绝缘电阻 insulation resistance |
|||
沸腾后 After boiling |
ohms | ||
at ordinary state at ordinary state |
ohms | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
0.79 mm 0.79 mm |
UL 94 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
M 级 M-level |
JIS K6911 | ||
拉伸强度 tensile strength |
MPa | JIS K6911 | |
弯曲模量 Flexural Modulus |
MPa | JIS K6911 | |
弯曲强度 Flexural Strength |
MPa | JIS K6911 | |
压缩强度 compressive strength |
MPa | JIS K6911 |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部 ![]()
阿科玛宣布进一步提升其中国常熟基地Kynar® 氟聚合物产能
2021-02-24 搜料网资讯: 基地氟聚合物产能,即到2022年实现PVDF产能增幅35%。同时,阿科玛欢庆常熟基地PVDF(聚偏二氟乙烯)成功投产迎来第一个十年。 新增产能预计于2022年底前投产。在锂电池 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |