
公司信息及水印








牌号简介 About |
---|
SABIC LLDPE MG200024 SABIC® LLDPE MG200024是一种具有窄分子量分布的高流动线性低密度聚乙烯共聚物级。SABIC® LLDPE MG200024为粉末状。应用SABIC® LLDPE MG200024通常用于吹塑、注塑和薄膜挤出应用中碳黑、二氧化钛或颜料含量很高的母粒。由于树脂是以自由流动的粉末形式提供的,因此它可以用于母粒生产,其中使用的是聚乙烯粉末。本产品不适用于任何医药/医疗应用,也不得用于任何医药/医疗应用。SABIC LLDPE MG200024 SABIC® LLDPE MG200024是一种具有窄分子量分布的高流动线性低密度聚乙烯共聚物级。SABIC LLDPE MG 200024呈粉末状。SABIC® LLDPE MG200024非常适合于母料应用,如吹塑、注塑和薄膜挤出。特别适用于炭黑、二氧化钛或颜料含量很高的母料。由于树脂是以粉末形式提供的,因此非常适合于使用聚乙烯粉末的母粒生产。本文所述产品尤其未经测试,因此未经验证可用于医药/医疗应用。 SABIC® LLDPE MG200024 SABIC® LLDPE MG200024 is a high flow linear low density polyethylene copolymer grade with a narrow molecular weight distribution. SABIC® LLDPE MG200024 is in powder form. Application SABIC® LLDPE MG200024 is typically used for masterbatches with very high carbon black, titanium dioxide or pigment content in blow moulding, injection moulding and film extrusion applications. Since the resin is supplied in free flowing powder form, it can be used for masterbatch production where PE powders are used. This product is not intended for and must not be used in any pharmaceutical/medical applications. SABIC® LLDPE MG200024 SABIC® LLDPE MG200024 is a high flow linear low density polyethylene copolymer grade with a narrow molecular weight distribution. SABIC® LLDPE MG 200024 is in powder form. SABIC® LLDPE MG200024 is well suited for masterbatch applications like blow moulding, injection moulding and film extrusion. Especially for masterbatches with very high carbon black, titanium dioxide or pigment content. Since the resin is supplied in powder form, it is extremely suited for masterbatch production where PE powders are used. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.924 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
20 | g/10min | ASTM D1238 |
抗环境应力开裂 ESCR |
|||
模压成型 Compression Molding |
24.0 | hr | ASTM D1693 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Izod Notched Impact strength |
|||
23℃,模压成型 23 ℃, molded |
540 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Brittle Temperature |
< -75.0 | ℃ | ASTM D746 |
维卡软化温度 Vicat Softening Temperature |
℃ | ASTM D1525 1 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,模压成型 Shaw's D, molded |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
|||
1% 正割,模压成型 1% cut, molded |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
ASTM D638 | ||
屈服,模压成型 Yield, molding |
MPa | ||
断裂,模压成型 Fracture, molded |
MPa | ||
拉伸应变 Tensile strain |
|||
断裂,模压成型 Fracture, molded |
% | ASTM D638 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 压 力1 (10N) |
3 速率 A (50°C/h), 压 力1 (10N) |
【新闻资讯】查看全部 ![]()
塑料袋的10个存储保鲜作用
2015-12-14 一直以来, 塑料袋难降解造成白色污染问题严重,国家开发生产可降解生物塑料技术,各地区采取“禁塑”政策,但是达到的效果都不明显。其实,在考虑各项政策及技术的同时也应该想想提高塑料袋循环再利用的问题。 我们去市场买菜,通常都是提着大袋小袋的背心袋回来,但是这些背心袋你是如何处置的呢?扔掉?还是当垃圾袋? 今天小编给大家带来一些塑料袋循环再利用的小方法,不仅能够解决背心袋没位置放、丢弃造成污染的问题,还可以解决食物不浪费的问题哦。 1、保鲜香菜 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |