
公司信息及水印






牌号简介 About |
---|
Tecasons是一种透明的工程塑料,以其耐化学性、硬度、高温性能和在高压釜环境中工作的能力而闻名。Tecasons符合FDA和NSF标准,在各种温度下都具有优异的机械性能。Tecsons独特的耐化学和水解性、高温性能、良好的机械性能和机构认证相结合,使其成为制药、医疗、食品服务设备、半导体加工和电子设备行业应用的最佳选择。 TECASON™S is a transparent engineering plastic known for its chemical resistance, rigidity, high-temperature performance, and its ability to operate in an autoclave environment. TECASON™S is FDA and NSF compliant and holds its excellent mechanical properties over a wide range of temperatures. TECASON™S' unique combination of chemical and hydrolytic resistance, hightemperature performance, good mechanical properties, and agency approvals make it an excellent choice for applications in the pharmaceutical, medical, food service equipment, semiconductor processing, and electronic equipment industries. Autoclave resistance Excellent electrical properties Good chemical resistance Superior resistance to creep FDA and NSF compliant High-temperature performance Excellent hydrolytic stability High strength and rigidity Flame retardant |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.24 | g/cm³ | ASTM D792 |
吸水率 Water Absorption |
|||
23℃,24hr 23℃,24hr |
0.30 | % | ASTM D570 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Izod Notched Impact strength |
|||
23℃ 23℃ |
69 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 HDT |
ASTM D648 | ||
0.45 MPa,未退火 0.45 MPa, unannealed |
181 | ℃ | ASTM D648 |
1.8 MPa,未退火 1.8 MPa, unannealed |
174 | ℃ | ASTM D648 |
线性热膨胀系数 Coeff.of linear therm expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
最高使用温度 Max. usage temperature |
|||
长期 long-term |
℃ | ||
短期 short-term |
℃ | ||
电气性能 ELECTRICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
|||
23℃ 23℃ |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant 3 |
|||
23 ℃,60 Hz 23 ℃,60 Hz 3 |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
23℃,60 Hz 23℃,60 Hz |
ASTM D150 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸模量 Tensile modulus |
|||
23℃ 23℃ |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
|||
断裂,23℃ Fracture, 23 ℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
弯曲模量 Flexural Modulus |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
弯曲强度 Flexural Strength |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
摩擦系数 Frictional coefficient 2 |
|||
与自身 - 动态 With oneself - dynamic 2 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 40 psi, 50 fpm |
3 50% RH |
【新闻资讯】查看全部 ![]()
中国进口聚乙烯价钱到达近5个月价钱高点
2017-09-01 中国进口聚乙烯价格从6月底开始即上涨表现突出,部分级别更是接近年全年高点,以低压膜和低压中空表现最为突出。 根据数据显示,截止8月25日,低压膜中国的周度估价评估在1,120-1,160美元/吨,较月底上涨72.5美元/吨,达到了近6个月的最高点;同时,低压中空中国主港周度估价评估在1,105-1,155美元/吨,较月底上涨了110美元/吨,达到了全年最高点。 进口聚乙烯价格的上涨趋势延续到了本周,国内贸易商表示,低压膜和低压中空集中交投区间在1,150-1 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |