
公司信息及水印






牌号简介 About |
---|
低粘度液体硅橡胶材料及压力注射成型产品描述2组分液体硅橡胶,其低粘度特别适用于低压注射成型,A:B=1:1组分的混合比,铂催化。A的外观是透明的,B是灰色的。关键特点:注射成型,低粘度,高回弹,20℃快速硫化,在不透气的条件下,A、B混合后保质期为5天,保质期随温度的升高而降低。应用真空灭弧室 Liquid silicone rubber material of low viscosity and pressure injection molding Product Description 2-part liquid silicone rubber, which is low viscosity particularly suitable for injection molding with low pressure, mixing ratio of parts A:B=1:1, catalyzed by platinum. The appearance of A is transparent and B is grey. Key Features Injection molding Low Viscosity High rebound Rapid vulcanization At the temperature of 20°C and in the condition of air-proof, the shelf life is 5 days after mixing A and B, the shelf life will decrease with the increasing of the temperature. Applications Vacuum interrupter |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.07 | g/cm³ | ASTM D792 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
30 | ASTM D2240 | |
弹性体 Elastomer |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
4.82 | MPa | ASTM D412 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
350 | % | ASTM D412 |
撕裂强度 tear strength 2 |
10.0 | kN/m | ASTM D624 |
电气性能 ELECTRICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | IEC 60093 | |
介电强度 Dielectric strength |
kV/mm | IEC 60243-1 | |
介电常数 Dielectric constant |
|||
50 Hz 50 Hz |
IEC 60250 | ||
耗散因数 Dissipation factor |
|||
50 Hz 50 Hz |
IEC 60250 | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
|||
储存稳定性 storage stability |
|||
20 ℃ 20 ℃ |
min | ||
贮藏期限 Storage period |
wk | ||
后固化时间 Post curing time |
|||
200℃ 200℃ |
hr | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 Color |
|||
-- -- 3 |
|||
-- -- 4 |
|||
固体含量 Solid content |
% | ||
粘度 viscosity |
Pa·s | DIN 53019 | |
固化时间 Curing time |
|||
140℃ 140℃ |
hr |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 B 模具 |
3 Part A |
4 Part B |
【新闻资讯】查看全部 ![]()
塑料再消费业“个头大”生长惊人
2016-03-23 作为可再生资源的废塑料已成为我国资源综合利用的重要组成部分,为提高石油资源利用率和减轻环境污染贡献了力量。记者日前从中国塑料加工工业协会了解到,我国废塑料产生量约3413万吨,再生利用量达到2487.8多万吨,占我国塑料消费量的30%左右,相当于节约原油4000多万吨,成为节能减排的重要生力军。 报告显示,废塑料再生利用产业已成长为经济发展中不可或缺的资源型环保产业。随着塑料制品的大量使用,科学合理安全处置废塑料成为保护环境和节约资源的重要课题。改革开放30多年来,我国的塑 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |