
公司信息及水印






牌号简介 About |
---|
NYCAST 6PA-MOS2是一种常用的干润滑剂填充轴承材料。Nycast6pa-mos2是一种更结晶的产品,具有更好的耐磨性,它还提供更好的抗压强度。 NYCAST 6PA MoS2 is manufactured to be a more crystalline product with improved wear resistance, improved compressive strength, and to be a popular choice as a dry lubricant -filled bearing material. Cast Nylons Limited offers this material in more standard sizes than any manufacture in the industry. The ability to cast nylon vs. extrusion allows Cast Nylons Limited to create custom Near Net Shapes with ease for special applications Typical applications for NYCAST 6PA MoS2 would include: Bearings - Wear Pads Gears - Valve seals Pulleys - Sprockets Sheaves - Wear Plate Wear Shoes - Thrust Washers |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.15 到 1.17 | g/cm³ | ASTM D792 |
吸水率 Water Absorption |
ASTM D570 | ||
24hr 24hr |
0.50 到 0.60 | % | ASTM D570 |
饱和 saturated |
5.0 到 6.0 | % | ASTM D570 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Izod Notched Impact strength |
37 到 48 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 HDT |
ASTM D648 | ||
0.45 MPa,未退火 0.45 MPa, unannealed |
204 到 221 | ℃ | ASTM D648 |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
连续使用温度 Continuous use temperature |
℃ | ASTM D794 | |
熔融温度 Melting temperature |
℃ | ||
线性热膨胀系数 Coeff.of linear therm expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
使用温度 Operating temperature |
|||
Intermittent Intermittent |
℃ | ||
电气性能 ELECTRICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
ASTM D150 | ||
60 Hz 60 Hz |
ASTM D150 | ||
1 kHz 1 kHz |
ASTM D150 | ||
100 kHz 100 kHz |
ASTM D150 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Flexural Modulus |
MPa | ASTM D790 | |
弯曲强度 Flexural Strength |
MPa | ASTM D790 | |
压缩模量 Compressive Modulus |
MPa | ASTM D695 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
剪切强度 shear strength |
MPa | ASTM D732 | |
摩擦系数 Frictional coefficient |
|||
与自身 - 动态 With oneself - dynamic |
ASTM D1894 | ||
负载变形 Load deformation |
% | ASTM D621 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部 ![]()
赢创发布 2021 年第三季度财报: 全年利润有望达到预期上限
2021-11-05 搜料网资讯: 第三季度销售额增长 33%,调整后 EBITDA 增长 24% 预计全年调整后 EBITDA 约为 24 亿欧元 预计 2021 年自由现金流提高至约 10 亿欧元 经过第三季度的强势表现,赢创发布更为精 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |