
公司信息及水印






牌号简介 About |
---|
用于线圈连接的汽车一次线电机引线、F类电机和变压器、泵、电磁阀、电器内部接线、传感器线、软电池电缆和道路车辆用低压多芯电缆的电线绝缘。 Automotive primary wire motor lead wires for coil connections, class F motors and transformers, pumps, solenoids, Internal wiring of appliances, sensor wires, flexible battery cables and wire insulation of low voltage multicore cables for road vehicles. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.20 | g/cm³ | ISO 1183/A |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,21.6kg 190℃,21.6kg |
4.0 | g/10min | ISO 1133 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热固性 thermosetting 4 |
IEC 540 | ||
负荷下伸长率 Elongation under load |
30 | % | IEC 60540 |
Residual elongation Residual elongation |
< 10 | % | IEC 60540 |
电气性能 ELECTRICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
1.0E+15 | ohms·cm | ASTM D257 |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
|||
20 ℃,50 Hz 20 ℃,50 Hz |
ASTM D150 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
极限氧指数 Oxygen Index |
% | ASTM D2863 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ISO 7619 | ||
拉伸强度 tensile strength |
IEC 811-1-1 | ||
-- -- 2 |
MPa | IEC 811-1-1 | |
-- -- 3 |
MPa | IEC 811-1-1 | |
拉伸应变 Tensile strain |
|||
断裂 fracture 2 |
% | IEC 811-1-1 | |
断裂 fracture 3 |
% | IEC 811-1-1 | |
断裂,-50℃ Fracture, -50 ℃ |
% | IEC 811-1-4 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 After crosslinking |
3 Before crosslinking |
4 at 200°C/15min/0.2 MPa |
【新闻资讯】查看全部 ![]()
2020年中国可降解塑料行业政策汇总及发展前景分析 未来市场规模有望突
2021-05-18 搜料网资讯: 中国可降解塑料市场有望迎来快速增长 塑料的发明和使用给人们的日常生活带来了极大的方便,但塑料污染问题日益严峻,由于不可降解的塑料类垃圾在自然界停留一般可 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |